| MII_EX_Bildgebung_Modalitaet_NM (Extension) | C | | Extension | There are no (further) constraints on this element Element idExtension Short descriptionOptional Extensions Element DefinitionOptional Extension Element - found in all resources.
Data typeExtension ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| id | | 0..1 | string | There are no (further) constraints on this element Element idExtension.id Short descriptionUnique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Data typestring Mappings |
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idExtension.extension Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension SlicingUnordered, Open, by url(Value) Extensions are always sliced by (at least) url ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| radiopharmaceutical | C | 0..1 | Extension | There are no (further) constraints on this element Element idExtension.extension:radiopharmaceutical Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| id | | 0..1 | string | There are no (further) constraints on this element Element idExtension.extension:radiopharmaceutical.id Short descriptionUnique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Data typestring Mappings |
| extension | C | 0..0 | Extension | There are no (further) constraints on this element Element idExtension.extension:radiopharmaceutical.extension Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension SlicingUnordered, Open, by url(Value) Extensions are always sliced by (at least) url ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| url | | 1..1 | uriFixed Value | Element idExtension.extension:radiopharmaceutical.url Short descriptionidentifies the meaning of the extension DefinitionSource of the definition for the extension code - a logical name or a URL.
CommentsThe definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Data typeuri Fixed valueradiopharmaceutical Mappings |
| value[x] | | 0..1 | CodeableConceptBinding | Element idExtension.extension:radiopharmaceutical.value[x] Short descriptionValue of extension DefinitionValue of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Data typeCodeableConcept BindingRadiopharmaceutical (extensible) ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Mappings |
| id | | 0..1 | string | There are no (further) constraints on this element Element idExtension.extension:radiopharmaceutical.value[x].id Short descriptionUnique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Data typestring Mappings |
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idExtension.extension:radiopharmaceutical.value[x].extension Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension SlicingUnordered, Open, by url(Value) Extensions are always sliced by (at least) url ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| coding | Σ | 0..* | Coding | There are no (further) constraints on this element Element idExtension.extension:radiopharmaceutical.value[x].coding Short descriptionCode defined by a terminology system DefinitionA reference to a code defined by a terminology system.
RequirementsAllows for alternative encodings within a code system, and translations to other code systems.
CommentsCodes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Data typeCoding ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Mappings- rim: n/a
- v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6
- rim: CV
- orim: fhir:Coding rdfs:subClassOf dt:CDCoding
- v2: C*E.1-8, C*E.10-22
- rim: union(., ./translation)
- orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
|
| text | S Σ | 0..1 | string | There are no (further) constraints on this element Element idExtension.extension:radiopharmaceutical.value[x].text Short descriptionPlain text representation of the concept DefinitionA human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.
RequirementsThe codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.
CommentsVery often the text is the same as a displayName of one of the codings.
Data typestring ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Mappings- rim: n/a
- v2: C*E.9. But note many systems use C*E.2 for this
- rim: ./originalText[mediaType/code="text/plain"]/data
- orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
|
| radionuclide | C | 0..1 | Extension | There are no (further) constraints on this element Element idExtension.extension:radionuclide Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| id | | 0..1 | string | There are no (further) constraints on this element Element idExtension.extension:radionuclide.id Short descriptionUnique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Data typestring Mappings |
| extension | C | 0..0 | Extension | There are no (further) constraints on this element Element idExtension.extension:radionuclide.extension Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension SlicingUnordered, Open, by url(Value) Extensions are always sliced by (at least) url ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| url | | 1..1 | uriFixed Value | Element idExtension.extension:radionuclide.url Short descriptionidentifies the meaning of the extension DefinitionSource of the definition for the extension code - a logical name or a URL.
CommentsThe definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Data typeuri Fixed valueradionuclide Mappings |
| value[x] | | 0..1 | CodeableConceptBinding | Element idExtension.extension:radionuclide.value[x] Short descriptionValue of extension DefinitionValue of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Data typeCodeableConcept BindingRadiopharmaceuticalIsotope (extensible) ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Mappings |
| id | | 0..1 | string | There are no (further) constraints on this element Element idExtension.extension:radionuclide.value[x].id Short descriptionUnique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Data typestring Mappings |
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idExtension.extension:radionuclide.value[x].extension Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension SlicingUnordered, Open, by url(Value) Extensions are always sliced by (at least) url ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| coding | Σ | 0..* | Coding | There are no (further) constraints on this element Element idExtension.extension:radionuclide.value[x].coding Short descriptionCode defined by a terminology system DefinitionA reference to a code defined by a terminology system.
RequirementsAllows for alternative encodings within a code system, and translations to other code systems.
CommentsCodes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Data typeCoding ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Mappings- rim: n/a
- v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6
- rim: CV
- orim: fhir:Coding rdfs:subClassOf dt:CDCoding
- v2: C*E.1-8, C*E.10-22
- rim: union(., ./translation)
- orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
|
| text | S Σ | 0..1 | string | There are no (further) constraints on this element Element idExtension.extension:radionuclide.value[x].text Short descriptionPlain text representation of the concept DefinitionA human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.
RequirementsThe codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.
CommentsVery often the text is the same as a displayName of one of the codings.
Data typestring ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Mappings- rim: n/a
- v2: C*E.9. But note many systems use C*E.2 for this
- rim: ./originalText[mediaType/code="text/plain"]/data
- orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
|
| tracerExposureTime | C | 0..1 | Extension | There are no (further) constraints on this element Element idExtension.extension:tracerExposureTime Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| id | | 0..1 | string | There are no (further) constraints on this element Element idExtension.extension:tracerExposureTime.id Short descriptionUnique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Data typestring Mappings |
| extension | C | 0..0 | Extension | There are no (further) constraints on this element Element idExtension.extension:tracerExposureTime.extension Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension SlicingUnordered, Open, by url(Value) Extensions are always sliced by (at least) url ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| url | | 1..1 | uriFixed Value | Element idExtension.extension:tracerExposureTime.url Short descriptionidentifies the meaning of the extension DefinitionSource of the definition for the extension code - a logical name or a URL.
CommentsThe definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Data typeuri Fixed valuetracerExposureTime Mappings |
| value[x] | C | 0..1 | SimpleQuantity | Element idExtension.extension:tracerExposureTime.value[x] Short descriptionA fixed quantity (no comparator) DefinitionThe comparator is not used on a SimpleQuantity
CommentsThe context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.
Data typeSimpleQuantity ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - qty-3: If a code for the unit is present, the system SHALL also be present
code.empty() or system.exists() - sqty-1: The comparator is not used on a SimpleQuantity
comparator.empty() Mappings- rim: n/a
- rim: N/A
- v2: SN (see also Range) or CQ
- rim: PQ, IVL<PQ>, MO, CO, depending on the values
|
| id | | 0..1 | string | There are no (further) constraints on this element Element idExtension.extension:tracerExposureTime.value[x].id Short descriptionUnique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Data typestring Mappings |
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idExtension.extension:tracerExposureTime.value[x].extension Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension SlicingUnordered, Open, by url(Value) Extensions are always sliced by (at least) url ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| value | Σ | 0..1 | decimal | There are no (further) constraints on this element Element idExtension.extension:tracerExposureTime.value[x].value Short descriptionNumerical value (with implicit precision) DefinitionThe value of the measured amount. The value includes an implicit precision in the presentation of the value.
RequirementsPrecision is handled implicitly in almost all cases of measurement.
CommentsThe implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).
Data typedecimal ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Mappings- rim: n/a
- v2: SN.2 / CQ - N/A
- rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
|
| comparator | Σ ?! | 0..0 | codeBinding | There are no (further) constraints on this element Element idExtension.extension:tracerExposureTime.value[x].comparator Short description< | <= | >= | > - how to understand the value DefinitionNot allowed to be used in this context
RequirementsNeed a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.
CommentsNote that FHIR strings SHALL NOT exceed 1MB in size
Meaning when missingIf there is no comparator, then there is no modification of the value
Data typecode BindingHow the Quantity should be understood and represented.
QuantityComparator (required) ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Mappings- rim: n/a
- v2: SN.1 / CQ.1
- rim: IVL properties
|
| unit | Σ | 0..1 | stringPattern | Element idExtension.extension:tracerExposureTime.value[x].unit Short descriptionUnit representation DefinitionA human-readable form of the unit.
RequirementsThere are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.
CommentsNote that FHIR strings SHALL NOT exceed 1MB in size
Data typestring ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) PatternSeconds Mappings- rim: n/a
- v2: (see OBX.6 etc.) / CQ.2
- rim: PQ.unit
|
| system | Σ C | 0..1 | uriPattern | Element idExtension.extension:tracerExposureTime.value[x].system Short descriptionSystem that defines coded unit form DefinitionThe identification of the system that provides the coded form of the unit.
RequirementsNeed to know the system that defines the coded form of the unit.
Commentssee http://en.wikipedia.org/wiki/Uniform_resource_identifier
Data typeuri ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1, qty-3 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Patternhttp://unitsofmeasure.org Mappings- rim: n/a
- v2: (see OBX.6 etc.) / CQ.2
- rim: CO.codeSystem, PQ.translation.codeSystem
|
| code | Σ | 0..1 | codePattern | Element idExtension.extension:tracerExposureTime.value[x].code Short descriptionCoded form of the unit DefinitionA computer processable form of the unit in some unit representation system.
RequirementsNeed a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.
CommentsThe preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.
Data typecode ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Patterns Mappings- rim: n/a
- v2: (see OBX.6 etc.) / CQ.2
- rim: PQ.code, MO.currency, PQ.translation.code
|
| units | C | 0..1 | Extension | There are no (further) constraints on this element Element idExtension.extension:units Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| id | | 0..1 | string | There are no (further) constraints on this element Element idExtension.extension:units.id Short descriptionUnique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Data typestring Mappings |
| extension | C | 0..0 | Extension | There are no (further) constraints on this element Element idExtension.extension:units.extension Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension SlicingUnordered, Open, by url(Value) Extensions are always sliced by (at least) url ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| url | | 1..1 | uriFixed Value | Element idExtension.extension:units.url Short descriptionidentifies the meaning of the extension DefinitionSource of the definition for the extension code - a logical name or a URL.
CommentsThe definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Data typeuri Fixed valueunits Mappings |
| value[x] | | 0..1 | Binding | Element idExtension.extension:units.value[x] Short descriptionValue of extension DefinitionValue of extension - must be one of a constrained set of the data types (see Extensibility for a list).
BindingPETUnit (extensible) ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Mappings |
| valueCodeableConcept | | | CodeableConcept | Data type CodeableConcept |
| radionuclideTotalDose | C | 0..1 | Extension | There are no (further) constraints on this element Element idExtension.extension:radionuclideTotalDose Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| id | | 0..1 | string | There are no (further) constraints on this element Element idExtension.extension:radionuclideTotalDose.id Short descriptionUnique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Data typestring Mappings |
| extension | C | 0..0 | Extension | There are no (further) constraints on this element Element idExtension.extension:radionuclideTotalDose.extension Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension SlicingUnordered, Open, by url(Value) Extensions are always sliced by (at least) url ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| url | | 1..1 | uriFixed Value | Element idExtension.extension:radionuclideTotalDose.url Short descriptionidentifies the meaning of the extension DefinitionSource of the definition for the extension code - a logical name or a URL.
CommentsThe definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Data typeuri Fixed valueradionuclideTotalDose Mappings |
| value[x] | C | 0..1 | SimpleQuantity | Element idExtension.extension:radionuclideTotalDose.value[x] Short descriptionA fixed quantity (no comparator) DefinitionThe comparator is not used on a SimpleQuantity
CommentsThe context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.
Data typeSimpleQuantity ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - qty-3: If a code for the unit is present, the system SHALL also be present
code.empty() or system.exists() - sqty-1: The comparator is not used on a SimpleQuantity
comparator.empty() Mappings- rim: n/a
- rim: N/A
- v2: SN (see also Range) or CQ
- rim: PQ, IVL<PQ>, MO, CO, depending on the values
|
| id | | 0..1 | string | There are no (further) constraints on this element Element idExtension.extension:radionuclideTotalDose.value[x].id Short descriptionUnique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Data typestring Mappings |
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idExtension.extension:radionuclideTotalDose.value[x].extension Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension SlicingUnordered, Open, by url(Value) Extensions are always sliced by (at least) url ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| value | Σ | 0..1 | decimal | There are no (further) constraints on this element Element idExtension.extension:radionuclideTotalDose.value[x].value Short descriptionNumerical value (with implicit precision) DefinitionThe value of the measured amount. The value includes an implicit precision in the presentation of the value.
RequirementsPrecision is handled implicitly in almost all cases of measurement.
CommentsThe implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).
Data typedecimal ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Mappings- rim: n/a
- v2: SN.2 / CQ - N/A
- rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
|
| comparator | Σ ?! | 0..0 | codeBinding | There are no (further) constraints on this element Element idExtension.extension:radionuclideTotalDose.value[x].comparator Short description< | <= | >= | > - how to understand the value DefinitionNot allowed to be used in this context
RequirementsNeed a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.
CommentsNote that FHIR strings SHALL NOT exceed 1MB in size
Meaning when missingIf there is no comparator, then there is no modification of the value
Data typecode BindingHow the Quantity should be understood and represented.
QuantityComparator (required) ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Mappings- rim: n/a
- v2: SN.1 / CQ.1
- rim: IVL properties
|
| unit | Σ | 0..1 | stringPattern | Element idExtension.extension:radionuclideTotalDose.value[x].unit Short descriptionUnit representation DefinitionA human-readable form of the unit.
RequirementsThere are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.
CommentsNote that FHIR strings SHALL NOT exceed 1MB in size
Data typestring ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) PatternMegabecquerel Mappings- rim: n/a
- v2: (see OBX.6 etc.) / CQ.2
- rim: PQ.unit
|
| system | Σ C | 0..1 | uriPattern | Element idExtension.extension:radionuclideTotalDose.value[x].system Short descriptionSystem that defines coded unit form DefinitionThe identification of the system that provides the coded form of the unit.
RequirementsNeed to know the system that defines the coded form of the unit.
Commentssee http://en.wikipedia.org/wiki/Uniform_resource_identifier
Data typeuri ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1, qty-3 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Patternhttp://unitsofmeasure.org Mappings- rim: n/a
- v2: (see OBX.6 etc.) / CQ.2
- rim: CO.codeSystem, PQ.translation.codeSystem
|
| code | Σ | 0..1 | codePattern | Element idExtension.extension:radionuclideTotalDose.value[x].code Short descriptionCoded form of the unit DefinitionA computer processable form of the unit in some unit representation system.
RequirementsNeed a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.
CommentsThe preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.
Data typecode ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) PatternMBq Mappings- rim: n/a
- v2: (see OBX.6 etc.) / CQ.2
- rim: PQ.code, MO.currency, PQ.translation.code
|
| radionuclideHalfLife | C | 0..1 | Extension | There are no (further) constraints on this element Element idExtension.extension:radionuclideHalfLife Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| id | | 0..1 | string | There are no (further) constraints on this element Element idExtension.extension:radionuclideHalfLife.id Short descriptionUnique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Data typestring Mappings |
| extension | C | 0..0 | Extension | There are no (further) constraints on this element Element idExtension.extension:radionuclideHalfLife.extension Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension SlicingUnordered, Open, by url(Value) Extensions are always sliced by (at least) url ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| url | | 1..1 | uriFixed Value | Element idExtension.extension:radionuclideHalfLife.url Short descriptionidentifies the meaning of the extension DefinitionSource of the definition for the extension code - a logical name or a URL.
CommentsThe definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Data typeuri Fixed valueradionuclideHalfLife Mappings |
| value[x] | C | 0..1 | SimpleQuantity | Element idExtension.extension:radionuclideHalfLife.value[x] Short descriptionA fixed quantity (no comparator) DefinitionThe comparator is not used on a SimpleQuantity
CommentsThe context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.
Data typeSimpleQuantity ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - qty-3: If a code for the unit is present, the system SHALL also be present
code.empty() or system.exists() - sqty-1: The comparator is not used on a SimpleQuantity
comparator.empty() Mappings- rim: n/a
- rim: N/A
- v2: SN (see also Range) or CQ
- rim: PQ, IVL<PQ>, MO, CO, depending on the values
|
| id | | 0..1 | string | There are no (further) constraints on this element Element idExtension.extension:radionuclideHalfLife.value[x].id Short descriptionUnique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Data typestring Mappings |
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idExtension.extension:radionuclideHalfLife.value[x].extension Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
CommentsThere can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Data typeExtension SlicingUnordered, Open, by url(Value) Extensions are always sliced by (at least) url ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists() Mappings |
| value | Σ | 0..1 | decimal | There are no (further) constraints on this element Element idExtension.extension:radionuclideHalfLife.value[x].value Short descriptionNumerical value (with implicit precision) DefinitionThe value of the measured amount. The value includes an implicit precision in the presentation of the value.
RequirementsPrecision is handled implicitly in almost all cases of measurement.
CommentsThe implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).
Data typedecimal ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Mappings- rim: n/a
- v2: SN.2 / CQ - N/A
- rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
|
| comparator | Σ ?! | 0..0 | codeBinding | There are no (further) constraints on this element Element idExtension.extension:radionuclideHalfLife.value[x].comparator Short description< | <= | >= | > - how to understand the value DefinitionNot allowed to be used in this context
RequirementsNeed a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.
CommentsNote that FHIR strings SHALL NOT exceed 1MB in size
Meaning when missingIf there is no comparator, then there is no modification of the value
Data typecode BindingHow the Quantity should be understood and represented.
QuantityComparator (required) ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Mappings- rim: n/a
- v2: SN.1 / CQ.1
- rim: IVL properties
|
| unit | Σ | 0..1 | stringPattern | Element idExtension.extension:radionuclideHalfLife.value[x].unit Short descriptionUnit representation DefinitionA human-readable form of the unit.
RequirementsThere are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.
CommentsNote that FHIR strings SHALL NOT exceed 1MB in size
Data typestring ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) PatternSeconds Mappings- rim: n/a
- v2: (see OBX.6 etc.) / CQ.2
- rim: PQ.unit
|
| system | Σ C | 0..1 | uriPattern | Element idExtension.extension:radionuclideHalfLife.value[x].system Short descriptionSystem that defines coded unit form DefinitionThe identification of the system that provides the coded form of the unit.
RequirementsNeed to know the system that defines the coded form of the unit.
Commentssee http://en.wikipedia.org/wiki/Uniform_resource_identifier
Data typeuri ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1, qty-3 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Patternhttp://unitsofmeasure.org Mappings- rim: n/a
- v2: (see OBX.6 etc.) / CQ.2
- rim: CO.codeSystem, PQ.translation.codeSystem
|
| code | Σ | 0..1 | codePattern | Element idExtension.extension:radionuclideHalfLife.value[x].code Short descriptionCoded form of the unit DefinitionA computer processable form of the unit in some unit representation system.
RequirementsNeed a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.
CommentsThe preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.
Data typecode ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Patterns Mappings- rim: n/a
- v2: (see OBX.6 etc.) / CQ.2
- rim: PQ.code, MO.currency, PQ.translation.code
|
| url | | 1..1 | uriFixed Value | Element idExtension.url Short descriptionidentifies the meaning of the extension DefinitionSource of the definition for the extension code - a logical name or a URL.
CommentsThe definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Data typeuri Fixed valuehttps://www.medizininformatik-initiative.de/fhir/ext/modul-bildgebung/StructureDefinition/mii-ex-bildgebung-modalitaet-nm Mappings |
| value[x] | | 0..0 | | There are no (further) constraints on this element Element idExtension.value[x] Short descriptionValue of extension DefinitionValue of extension - must be one of a constrained set of the data types (see Extensibility for a list).
ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) Mappings |